How-To Instructions:
Building A Tree Ring With PaverTrax

How To Build A Tree Ring With Pavers

Welcome to the PaverTrax Instructional Page! This is where you’ll find how to build a tree ring with pavers using the PaverTrax System and everything you need to set up and use your PaverTrax system with confidence. Whether you’re a DIY homeowner or a landscaping professional, the video below will walk you through each step of the process… from preparing the ground to installing your pavers.

Ready to purchase your PaverTrax Circle?

Download or check out our step-by-step written guide below on building a perfect tree ring with pavers using the PaverTrax Tree Ring Circle System.

Step-by-Step Guide to Using The PaverTrax System:

***This product is designed around 3″ x 6″ x 10″ paver bricks as well as the 3″ x 5.88″ x 10″ bricks available at all Home Depots***

Step 1:

Determine the Diameter size: The PaverTrax system offers five diameter sizes, ranging from 12 to 16 paver bricks on the base level. External Diameters: 12 Pavers 3’ 5” 13 Pavers 3’ 8” 14 Pavers 3’ 11” 15 Pavers 4’ 2” 16 Pavers 4’ 5” Choose the required diameter that best suits the size of your tree trunk and the space surrounding it.

Not sure which bricks to use? Choosing the Right Bricks for Your PaverTrax System

Step 2:

Preparation of the ground:

The PaverTrax system has been designed in order for it to be used with little or no preparation however if you wish to dig out on the inside of the track or around the tree and add mulch or soil this we will leave up to you.

Step 3:

Assemble the Track System:

Once you’ve determined the diameter size, use the track system to assemble the ring. Line up the number of paver bricks you plan to use with the corresponding hole on the adjacent track and secure it with a locking pin that you snap away from the track. Repeat the process for each of the tracks.

Step 4:

Center the Track System around the Tree:

Once the track system is complete, center it around the tree. Use a tape measure to confirm equal distances between the tree and the track.

Step 5:

Add the First Layer of Pavers:

Place your pavers on the track system as in the picture on the left. Feel free to add another layer of pavers to your wall.

Step 6:

Desired Finish

Again depending on what finish you require you can place soil or mulch inside of your tree ring however we would recommend mulch of which will deter weeds and grass growing on the inside of your tree ring

Step 7:

Enjoy!

How-To Instructions:Building A Tree Ring With PaverTrax